You are here:   Forum
Register   |  Login

Forum

Minimize
HomeHomeDiscussionsDiscussionsGeneralGeneralManual Call Point factoryManual Call Point factory
Previous
 
Next
New Post
7/20/2018 1:22 AM
 
Introduction:
The emergency door release manual call point is 3 poles with sounder and light. The manual call point are used to allow building occupants to signal that a emergency exists within the building.
Specifications
Product NameEmergency Door Release Manual Call Point
Power supplyDC 12-24V
Operation currentDC 12V/18mA(Standby)/75mA(Operation)
DC 24V/11mA(Standby)/41mA(Operation)
BuzzerSet as silent, interval wailing or continuous wailing
IndicatorDual-color (red and green).
Red indicator to set blinking,off or on.
OutputN.O.N.C.&COM.Output(Maximum load of 125V/3A)
MaterialABS,PC(trasparent part)
Starting parts typeReusable
Starting modeManual pull down plate
Reset modeKey reset
Weight208g
Dimensions90*93*45mm
InstallationSurface mounted with screw
Features
1.Resetable design,obvious indicators around the edges of the unit.
2.Press the pressing plate to enable the output function.
3.Pressing plate with status (green and red) shown.
4.Reversionary key with non-slip design.
5.Input power range from DC12-24V to connect with all types of alarm system.
6.Built-in buzzer status to set as silent,interval wailing or continuous wailing Volume is adjustable.
7.Easy to assemble,outer case without screws,3 set of output points to connect other equipment,embedded or surface installations to select.
Note: only has output point function.
Manual Call Point factory
website:http://www.yixinalarm.com/manual-call-point/
 
Previous
 
Next
HomeHomeDiscussionsDiscussionsGeneralGeneralManual Call Point factoryManual Call Point factory